Skip to main content

Network issues

Speed up sync time

Use checkpoint sync to sync Teku from a recent finalized checkpoint, bypassing the need to sync from genesis and enabling a quick synchronization process within minutes. To do this, use the --initial-state CLI option which accepts a URL or file that provides a recent finalized BeaconState. Any synchronized beacon node can provide this from the standard API, and you can view the list of public sources.

The --initial-state option is only used when you first create a database. To restart an existing sync process with checkpoint sync, do the following:

  1. Stop the current Teku sync process.
  2. Delete the beacon directory under your data path.
  3. Start teku with the --initial-state option .

Teku will sync within a few minutes, and downloads historic blocks in the background, so it can help any peers that are syncing from genesis. Teku can run validators and attest while while historic blocks are being downloaded.

Locate the multiaddress and/or ENR of a Teku beacon node

Teku outputs its Ethereum Name Record (ENR) to the logs at startup. You can also access the info via the API:

curl "http://127.0.0.1:5051/eth/v1/node/identity" | jq

You can decode the ENR by using the ENR Viewer website.

Resolve peering issues

Peer connection issues

By default, Teku attempts to get 100 peers. You can increase the number of peers to improve performance, but this does lead to increased network traffic and a higher number of messages requiring validation.

Teku's attempt to connect with peers is influenced by two CLI options: --p2p-peer-lower-bound (default is 64) and --p2p-peer-upper-bound (default is 100). If you notice a decline in your beacon node's participation after reducing these parameters, consider increasing them to enhance performance.

Firewall connection issues

To determine the number of inbound and outbound peers via the beacon node's REST API, you can send a request to the peers endpoint. This gathers data and organizes it based on the direction, either inbound or outbound.

curl http://127.0.0.1:5051/eth/v1/node/peers |jq '.data | group_by(.direction)[] | {direction: .[0].direction, count: length}'

If only outbound peers are displayed, it indicates that peers cannot connect to your infrastructure from the outside. Networks typically have a firewall at the entry point (router / modem / gateway) that blocks incoming data by default.

To resolve this, update the firewall to include a rule that allows access to the --p2p-port (9000 by default) for both UDP and TCP traffic. Subsequently, forward this port (TCP and UDP) to the internal IP address of the machine running the beacon node. Some operating systems also have local firewalls that should be updated to permit communication through this port.

info

View the Prysm guide for more information on this topic, but you need to substitute your --p2p-port (9000 by default) for the port numbers.

Advertised IP address issues

A possible reason for incoming peers being unable to connect could be an incorrect address specified using the --p2p-advertised-ip option. Teku auto-detects the address to use by default, so most users won't need to use this option. If you're experiencing issues with incoming peers despite having correct firewall and forwarding settings, this could potentially be the cause.

Network gateway issues

A potential reason for incoming peers not being able to connect could be the use of a different port on your network gateway (router or modem). This usually happens because only one service can listen on a port. Therefore, if you're running multiple beacon nodes, you'll need to open multiple ports on your gateway. The simplest solution is to use the same port on your gateway as specified in your --p2p-port (9000 by default). However, if necessary, users can also update the advertised port using the --p2p-advertised-port command.

Resolve poor attestation performance

Troubleshooting poor attestation performance is complicated, and the solution requires you to identify the root cause.

This video, while slightly dated, still provides valuable and applicable insights.

Common issues include:

  • The CPU is overloaded and Teku is lagging. Monitor CPU stats, and watch the terminal for frequent regenerating state messages, common during Teku's struggle. In this context, enabling --p2p-subscribe-all-subnets can worsen the situation by raising CPU usage. A typical problem arises when JVM lacks adequate heap allocation, causing aggressive garbage collection. Ensure an environment variable like JAVA_OPTS=-Xmx5g is set, with 5g (five gigabytes of heap) as an optimal value; 4g is acceptable, while anything much lower may lead to problems.

  • Time sync on your server is poor. Ensure ntpd or chrony is configured correctly.

  • Low numbers of peers, or poor quality peers. Refer to the peering troubleshooting topic for more information to resolve this.

  • Poor internet speed. An example is someone was on an ADSL link with only about 2.5 Mbps upstream which led to misses, typically anything over 10 Mbps upstream is acceptable.

Address missing attestations or non-inclusion issues

  • No peers might have been present on the attestation subnet. Check for a log message when attempting to publish without subscribed peers: Failed to publish ... for slot ... due to missing peers on the required gossip topic.
  • Several factors could contribute, such as delayed blocks past your inclusion slot causing ripple effects. Thus, examining epochs where your attestation was scheduled and checking for late block import warnings would be beneficial.
  • Also, consider specific times of day and concurrent network activities. It's possible that message transmission could be hindered by factors like bandwidth limitations.

Invalid signer public key configuration

You may see log error messages similar to:

Caused by: java.lang.IllegalArgumentException: Expected 48 bytes but received 58.

This arises if validators-external-signer-public-keys is in the config file without proper quotation for public keys. In YAML, 0x prefixed values are treated as numbers, leading the parser to convert them to an unexpected binary format in Teku. Previous Teku versions had a YAML parser that didn't perform this conversion, making both quoted and unquoted forms functional.

Incorrect:

validators-external-signer-public-keys:
- 0x8f9335f7d6b19469d5c8880df50bf41c01f476411d5b69a8b121255347f1c0b8400ba31a63010b229080240589ad2423
- 0xb3f3faa8dfa1030714559b95cb0107e53c9ee9c6f2b4b11f29e60417dbc4462052ff2d2dbbe98d808e3093858a3acdcc
- 0xb2f1e6c00c6716d4cd5cb02b42678ff481e3ae1525cdfc33e4a1711eeb2878da10ebeacdcdc2ef2049410fc60fe5cfe5
- 0xb7d6cb9ce7397c33b89ec57de0de383c7c294687b8963f92cc60f59bb1de46c56623cd24c9cc1e407db92d1a79920887
- 0xaf3eab6962987321bdf81e7a10239b91316c643cca64babe81d68e9f9030a6a7b91681168df5a02a9ac3433b8332a712

Correct:

validators-external-signer-public-keys:
- "0x8f9335f7d6b19469d5c8880df50bf41c01f476411d5b69a8b121255347f1c0b8400ba31a63010b229080240589ad2423"
- "0xb3f3faa8dfa1030714559b95cb0107e53c9ee9c6f2b4b11f29e60417dbc4462052ff2d2dbbe98d808e3093858a3acdcc"
- "0xb2f1e6c00c6716d4cd5cb02b42678ff481e3ae1525cdfc33e4a1711eeb2878da10ebeacdcdc2ef2049410fc60fe5cfe5"
- "0xb7d6cb9ce7397c33b89ec57de0de383c7c294687b8963f92cc60f59bb1de46c56623cd24c9cc1e407db92d1a79920887"
- "0xaf3eab6962987321bdf81e7a10239b91316c643cca64babe81d68e9f9030a6a7b91681168df5a02a9ac3433b8332a712"

Teku crashes with SIGILL

The BLST library might erroneously use the optimized library version instead of the portable one. This could stem from CPU auto-detection errors, in which case, obtaining the CPU details from /proc/cpuinfo on Linux or /usr/sbin/sysctl -a on macOS will help us to improve it. Alternatively, users might have intentionally set BLST to optimal.

You can specifically request the portable version of BLST (overriding CPU detection) with the following:

JAVA_OPTS="-Dteku.portableBlst=true"

If the user has already set -Dteku.portableBlst=false it should be changed to true.

Force Teku to use the optimized BLST library

Check the Teku logs at startup for Using optimized BLST library if it was able to detect a compatible CPU, or Using portable BLST library if it could not.

You can force Teku to use the optimized version by setting the environment variable TEKU_OPTS="-Dteku.portableBlst=false". If you're already setting TEKU_OPTS or JAVA_OPTS, append -Dteku.portableBlst=false to the existing variable. If you use the optimized library on a CPU that doesn't support it, Teku will crash with a SIGILL, in which case you should switch back to the portable version (TEKU_OPTS="-Dteku.portableBlst=true").

Configure an archive node

Set --data-storage-mode to archive, and provide an --initial-state, you can also use --reconstruct-historic-states to rebuild all the old states once blocks have been downloaded.

It will take a while to build up the node, but you'll be able to access all state an block information back to genesis after it is completed.